Image of Exploring ONAIR Air Compressors: Choosing the Right Stage and Model - Shop ONAIR

Choosing an ONAIR Compressor: Single or Dual?

ONAIR KNOWLEDGE / AIR SUPPLY

ONE COMPRESSOR OR TWO?

A good air supply is about reserve, recovery and how you actually use the system. More hardware isn't automatically the right answer for every car.

Your air tank stores compressed air. The compressor refills it after adjustments. Choosing the right combination means balancing available space, electrical capacity, tank size, operating pressure and how often you raise or lower the suspension.

COMPACT AND PRACTICAL

SINGLE COMPRESSOR

COMPRESSOR→AIR TANK

A strong choice for a simpler installation when the tank reserve and compressor's rated recovery suit your daily adjustments.

  • Less mounting space and hardware
  • Simpler plumbing and electrical installation
  • Lower initial component cost
  • Recovery rate depends on the selected model

ADDED RECOVERY CAPACITY

DUAL COMPRESSORS

2 × COMPRESSOR→AIR TANK

Worth considering when adjustments are frequent or you need additional tank recovery capacity and have the room and wiring for it.

  • Potentially faster recovery with matched compressors
  • Additional mounting and power requirements
  • Each compressor needs suitable protection
  • Correct air plumbing and service access still matter

THE DETAIL PEOPLE MISS

YOUR TANK CHANGES THE EXPERIENCE.

A larger air tank gives you a greater volume of stored air at a given pressure, but it also takes more air to refill. Pair a larger tank with a compressor setup that matches how often you plan to adjust the car. The best combination isn't necessarily the one with the biggest components.

Use the compressor manufacturer's current duty-cycle, pressure and current-draw specifications, and make sure the tank and other pneumatic components are appropriately rated for the system's operating range.

THINK ABOUT THESE FIRST.

How often will I adjust ride height?

Occasional parking adjustments and frequent height changes place different demands on your air reserve and tank recovery. Think about actual use, not just a show-day scenario.

Where will the compressor and tank live?

Measure usable trunk, frunk or concealed space, including mounting clearances, ventilation, secure attachment, drainage and future service access.

What changes when I add a second compressor?

Electrical planning becomes especially important. Verify wire runs, relays, fusing, grounding and vehicle electrical capacity for both devices rather than assuming a single-compressor circuit will be enough.

BUILD THE AIR SUPPLY AROUND YOUR CAR.

Review the actual compressor ratings, tank options and available management packages before ordering.

SHOP COMPRESSORS COMPARE AIR TANKS

KEEP LEARNING.

Image of Black BMW E30 summer project car photographed by APOX Media, featured in ONAIR's winter storage guide.
Aired Out or Aired Up? How to Store a Bagged Car for Winter

Should you store a bagged car aired out or aired up? ONAIR explains the recommended height, moisture control and winter...

Image of Mint-green classic Volkswagen Beetle aired out on grass - Lukaszsports x ONAIR build
Classic VW Beetle on Air: Custom Frunk | ONAIR x Lukaszsports

Lukaszsports x ONAIR bring a classic Volkswagen Beetle to the ground with a custom-fabricated frunk, 4-gallon seamless tank, VIAIR compressor...

Image of 2019 Volkswagen Golf Alltrack bagged on ONAIR air suspension, full rear three-quarter view
2019 Volkswagen Golf Alltrack on Air | ONAIR x ADE Creations

A bagged 2019 Volkswagen Golf Alltrack featuring ONAIR performance air suspension, a fully hidden dual-compressor 4V setup and an ADE...

FROM ARTICLE TO AIR RIDE

BUILD THE COMPLETE SYSTEM.

Ready to put the pieces together? Build your ONAIR setup step by step and keep the whole package in one place.

Build Your ONAIR Kit