ONAIR / Product Guides
2V or 4V: which control fits you?
Front/rear simplicity or individual corners? Here is the difference that matters before you buy.
ONAIR 2V controls the front and rear axles and offers three pressure presets plus a wireless key fob. ONAIR 4V adds individual-corner control, five presets and supported iPhone Bluetooth operation. Choose the controls you will use, not an assumed difference in ride quality.

Front/rear operation and a parked-car wireless fob.
Individual corners and more saved pressure profiles.
Pressure presets are not measured ride-height targets.
01 / THE DETAILS
The useful side-by-side comparison.
| Feature | 2V | 4V |
|---|---|---|
| Adjustment | Front axle, rear axle or whole vehicle. | Individual corners, pairs or whole vehicle. |
| Saved presets | Three pressure profiles. | Five pressure profiles. |
| Remote convenience | Included wireless key fob. | Supported iPhone Bluetooth app; Apple Watch through the supported setup. |
| Compressor pressure control | Built into the manifold; configurable through the controller within equipment limits. | Included external tank pressure switch with factory-set thresholds. |
| Handheld connection | USB-C controller connector; use the supplied cable. | USB-C controller connector; use the supplied cable. |
02 / THE DETAILS
Choose 2V for straightforward operation.
The fronts move together and the rears move together. The compact manifold and three presets suit someone who wants a simple routine rather than individual left/right adjustment.
The included A-D fob can operate with the ignition off while management remains powered and there is air in the tank. Keep the car in sight and everyone clear when operating the suspension. See current 2V details.
03 / THE DETAILS
Choose 4V when independent corners matter.
Each corner has its own pressure display and adjustment. You also retain paired and full-vehicle operation, with five saved pressure profiles.
The current listing supports iPhone control. Android support is being updated, so confirm its current status before buying when Android operation is essential. The handheld remains the primary control.
The current 4V app operation requires the ignition on. Do not assume it behaves like the 2V parked-car fob. See current 4V details.
04 / THE DETAILS
More controls do not mean automatic height measurement.
These presets target pressure. Actual vehicle height can change with passengers, luggage and other conditions. Establish the driving position on the installed car and check clearance rather than treating the display as a physical-height measurement.
Manual damping adjustment belongs to the suspension. Adding independent valves or an app does not change the damper specification. Understand pressure versus height-based control.
05 / THE DETAILS
Check the package, then finish the plan.
Both management listings separate the suspension, compressor and tank from management. Airline and fittings depend on the selected option. Check the supplied relay and pressure-control arrangement before planning wiring or buying another pressure switch.
- Choose front/rear or individual-corner control.
- Confirm the remote or phone behaviour you need.
- Check the included hardware and correct airline option.
- Keep every pressure setting within the limits of the complete installed system.
ONE MORE THING
The questions that come next.
Can 2V adjust left and right separately?
No. It groups the front axle and rear axle. Choose a compatible four-corner system when independent left/right operation is required.
Does 4V automatically level the car by physical height?
Its saved profiles are pressure-based. Individual-corner control is not the same as a height-sensor system.
Will either controller adjust the damper knobs for me?
No. The air controller operates the pneumatic system. ONAIR PAS damping is adjusted manually at the suspension.
Sources & equipment references
General education is not a replacement for the instructions supplied with your exact components. Product-specific ratings and procedures do not transfer automatically to another setup.
- ONAIR 2V Management System
Current controls, key-fob operation, compressor control and contents.
- ONAIR 4V Management System
Current corner control, phone compatibility, presets and external switch.




