VEHICLE-SPECIFIC FITMENT
Configured around your application rather than treated like a universal setup.
ONAIR Performance Air Suspension | Built to fit your vehicle
Need help confirming fitment?
ONAIR Performance Air Suspension | Built to fit your vehicle
$2,899.00
Shipping calculated at checkout.
Description
Vehicle-specific Performance Air Suspension built to order around your application, with adjustable ride height and 36-point dampening control for dialing in stance and road feel.
Each system is prepared around the year, make and model supplied with the order. Product geometry and included hardware can vary by vehicle application.
What You’re Getting
- Complete front and rear ONAIR Performance Air Suspension for the selected application
- 36-point adjustable dampening
- Adjustable ride height
- Camber plates where applicable
- Stainless steel braided front lines where applicable
- Adjustable collar rings and application-specific hardware
Built Around Your Vehicle
After ordering, ONAIR reviews the vehicle details supplied with the order before the suspension moves into build and configuration. This helps make sure the system is prepared for the correct application instead of treated like a generic off-the-shelf kit.
Complete the Air Ride System
Air management, compressor, tank and supporting air-supply components are selected separately unless they are included in the package you choose. Use Build Your Air Ride if you want to configure the full system step by step.
ONAIR Support
Eligible original ONAIR owners are supported by our Lifetime Confidence Warranty, subject to warranty terms and eligibility. If you are unsure about fitment or configuration, contact ONAIR before ordering.
Built to order: Approximately 2 weeks after your vehicle fitment information is confirmed. Shipping transit is additional.
ONAIR Performance Air Suspension | Built to fit your vehicle
Blue / FULL KIT
$2,899.00
THE DETAILS MATTER.
BUILT TO BE TUNED.
Air suspension should do more than move the car up and down. ONAIR Performance Air Suspension is built around fitment, road feel and adjustability so the setup can be dialed around the car.
36
DAMPENING
POSITIONS
POSITIONS
SOFTER CRUISEFIRMER RESPONSE
Fine-tune the dampers instead of settling for one fixed road feel.
CAMBER PLATES
Included where applicable for additional front-end adjustment.
BRAIDED FRONT LINES
Stainless steel braided front lines are included with the system.
ADJUSTABLE CONSTRUCTION
Threaded strut construction and adjustable lower mounts help you dial in the setup.
WHAT YOU'RE GETTING
THE SUSPENSION. CLEARLY.
FRONT + REAR ONAIR AIR SUSPENSION
Complete front and rear air bags and shocks configured around the selected vehicle application.
36-POINT PERFORMANCE DAMPERS
Adjustable dampers let you tune road feel from softer cruising to a firmer response.
CAMBER PLATES WHERE APPLICABLE
Included on supported applications for additional front-end alignment adjustment.
BRAIDED FRONT AIR LINES
Stainless steel braided front lines are included with the suspension system.
ADJUSTMENT + CONNECTION HARDWARE
Adjustable collar rings plus the required fittings and connectors supplied with the suspension package.
AIR RIDE, EXPLAINED.
THREE PARTS. ONE SYSTEM.
You do not need to be an air suspension expert to build the right setup. The air spring changes height. The damper controls how the car moves. Management controls the air.AIR SPRING
Replaces the conventional spring and uses air pressure to raise or lower the vehicle.
PERFORMANCE DAMPER
Controls suspension movement and road feel. This is where ONAIR's 36-point adjustment lets you tune the car.
AIR MANAGEMENT
Controls pressure and height from inside the car. Management, compressor and tank are selected separately.
REAL ONAIR AIR SPRINGTHE AIR SPRING
QUALITY YOU CAN SEE.
The air spring is constantly flexing as the vehicle rises, drops and moves down the road. Reinforced rubber construction gives the spring the flexibility it needs while supporting repeated movement and system pressure.01PROTECTIVE OUTER RUBBERThe flexible working surface that sees repeated movement and road use.
02REINFORCED STRUCTURAL BODYInternal reinforcement helps support the air spring through load and movement.
03AIR-RETAINING INNER SURFACEThe inner construction is designed to contain system pressure through repeated cycles.
BUILT FOR REAL ROADS
STANCE IS ONLY HALF THE JOB.
Canadian street cars see temperature swings, rough pavement, expansion joints, potholes and long drives. ONAIR is designed around usable suspension travel, adjustable damping and durable air-spring construction so the setup is built to be driven, not just parked low.TEMPERATURE SWINGSROUGH PAVEMENTDAILY DRIVINGUSABLE TRAVEL
PERFORMANCE DAMPERS
HEIGHT IS AIR. CONTROL IS DAMPING.
An air spring determines ride height, but the damper controls how quickly the suspension moves. ONAIR Performance Air Suspension gives you 36 damping positions so you can move from a softer street feel toward a firmer, more controlled response.SOFTERBALANCEDFIRMER
Fine-tune the road feel to your preference. The exact setting you prefer depends on the car, road and driving style.- 36damping positions
- ADJUSTABLEroad feel
- VEHICLE-SPECIFICapplication
WHERE APPLICABLE
CAMBER ADJUSTMENT BUILT INTO THE HARDWARE.
Application-specific camber plates can provide additional front-end adjustment when the vehicle platform allows for it. Braided front lines, threaded adjustment and vehicle-specific mounts complete the hardware story.
BUILT TO ORDER
BUILT FOR YOUR CAR.
BUILT FOR YOUR CAR.
NOT PULLED FROM A SHELF.
Every ONAIR Performance Air Suspension order is prepared around the vehicle application. Here is what happens after you order.
VEHICLE DETAILS
You provide the year, make and model at checkout, plus trim or chassis information when it helps identify the exact application.
FITMENT REVIEW
The ONAIR team reviews the order and confirms the application before the suspension moves forward.
BUILT + CONFIGURED
Your suspension is prepared for the vehicle rather than treated like a generic off-the-shelf kit.
FINAL CHECK + SHIPPING
Once the order is ready, it moves through final review and you receive the normal Shopify shipping update.
Planning around a show or install date?Build timing varies by application and current order volume. Contact ONAIR before ordering if you are working toward a specific deadline.
PERFORMANCE AIR SUSPENSION
ENGINEERED AROUND THE CAR.
36-Point Dampening
Fine-tune road feel from softer cruising to a firmer performance setup.
Vehicle-Specific Fitment
Each kit is built around the year, make and model selected for the order.
Camber Plates
Included where applicable for additional front-end alignment adjustment.
Braided Front Lines
Stainless steel braided front lines are included with the complete kit.
FITMENT MATTERS.CHECK YOUR VEHICLE →
OWNERSHIP
KEEP YOUR AIR RIDE DIALED.
Air ride is a working pneumatic suspension system. A few simple habits can help you spot small issues early and keep the setup clean.
MANAGE MOISTURE
Check and drain a manual water trap as moisture collects. Automatic drain systems still benefit from periodic visual inspection.
WATCH AIRLINE ROUTING
Keep airline away from rubbing points, sharp edges and excessive heat. Clean, square cuts help push-to-connect fittings seal properly.
LISTEN TO THE COMPRESSOR
If the compressor starts cycling much more often than normal while the car is parked, inspect the system for a possible air leak instead of ignoring the change.
INSPECT THE SUSPENSION
Include mounting hardware, lines and visible suspension components in normal vehicle inspections, especially after rough-road use or major ride-height changes.
CANADIAN WINTERS
Road salt, slush and debris are hard on every underbody component. Keep exposed parts reasonably clean and inspect lines and fittings after harsh winter use.
USE THE SYSTEM AS DESIGNED
Stay within the rated limits of the components in your setup and follow the instructions supplied with your ONAIR equipment.
PROVEN IN THE REAL WORLD
REAL OWNERS. REAL ONAIR.
★★★★★
See what ONAIR owners have to say about the products, support and experience behind their builds.
COMPLETE YOUR SETUP
Build the rest of the system around the suspension.
